Pages Navigation Menu

Optical Character Recognition (OCR) on difficult characters

Posted in Automotive, Cognex, Featured, Inspection, OCR (Optical Character Recognition), Video

The Challenge: To read very badly printed inkjet characters on a production line. The Solution – Optical Character Recognition (OCR): A self-contained, turnkey vision system to read every single...

Read More

Bead Tracking

Posted in Automotive, Cognex, Featured, Flaw Detection, Inspection, Object Location, Precision Measurement, Presence/Absence, Robotic Guidance, Video

...

Read More

Reliably Verify 2D Data Matrix Codes

Posted in 2D Datamatrix Reading, Automotive, Cognex, Featured, Flaw Detection, Inspection

The industry now has standards to reliably verify 2D Data Matrix codes. What metrics and methods can you use to assess a mark’s overall quality? By Carl W. Gerst III, Cognex Corporation, Senior Director & Business Unit Manager, ID Products INTRODUCTION Conventional bar codes (such as Universal Product Codes, or UPCs) have gained wide acceptance in applications ranging from checkout and inventory control in retail sales to tracking printed-circuit-board serial numbers in electronics manufacturing. To increase the character content and to store the information in smaller spaces, companies have developed two-dimensional alternatives. One of these, called Data Matrix, adopted as a standard, places square or round cells in a rectangular pattern. Its borders consist of two adjacent solid sides (the “L”) with the opposite sides made up of equally spaced dots. This symbology allows users to store information such...

Read More

Verify & Monitor Direct Part Markings

Posted in 2D Datamatrix Reading, Automotive, Cognex, Featured, Flaw Detection, Inspection, Part Identification, Video

The Challenge: The customer wanted to read and verify 2D datamatrix codes that have been laser marked and / or dot peened onto the surface onto machined surfaces. The laser marked codes were not too much of a problem as there are no wear parts on the laser marking system. However, the stylus on the dot peen marker wore and as a result the quality of the code deteriorated. All codes marker need to meet at least a grade C on the AIM-DPM standard. Zero defect assemblies are crucial in the process so every code needs to be successfully read, therefore the code quality must meet the standards. When poor quality code is identified an alarm needs to be triggered to prompt the operator to remove it from the line so that the stylus can be replaced and the...

Read More

Cognex In-Sight 500

Posted in Cognex, Products

In-Sight 500 Vision System Accelerated image acquisition for inspection on ultra-high speed manufacturing processes The In-Sight® 500 vision system is a high-performance, fixed-mount vision system, packaged in a rugged, IP65-rated housing. The In-Sight 500 vision system boosts an accelerated acquisition implementation which enables the system to acquire partial images up to 500 frames per second (fps). In addition to the standard In-Sight programming interface, In-Sight 500 provides an extensive tool set and state-of-the-art communication methods. Powered by Cognex VSoC™ The In-Sight 500 vision system is powered by a proprietary vision chip technology, Cognex VSoC™ (Vision System on a Chip), which enables the system to process images at up to 500 fps with windowed acquisition. High speed, simple vision inspection In addition to the standard In-Sight programming interface, expansive tool set and communication methods, the In-Sight 500 vision system achieves speeds...

Read More

Cognex In-Sight 5000

Posted in Cognex, Products

Industrial Cameras: In-Sight 5000 Industry-leading performance and ruggedness The unprecedented vision power and unmatched ruggedness of the In-Sight® 5000 Series vision systems are helping manufacturers around the world improve productivity, ensure product quality and lower manufacturing costs. And, an array of In-Sight models means that there’s one just right for your application. Industrial-Grade Design… In-Sight 5000 Series vision systems are the only vision systems in the world that provide industrial-grade features as standard. Rugged die-cast aluminum and stainless steel cases that can withstand the punishment of vibration, sealed M12 connectors, and a protective lens cover for IP67 and IP68 rated protection against dust and moisture—it all adds up to peace of mind on the factory floor. Unmatched Performance… Every In-Sight 5000 Series vision system delivers best-in-class performance. Most models are equipped with a full library of proven Cognex vision...

Read More

Cognex In-Sight Micro

Posted in Cognex, Products

In-Sight Micro Vision Systems Make it small. Make it smart. Make it easy. Make it colorful! Cognex has achieved all of this and more with the next-generation In-Sight® Micro vision system. Smallest…In-Sight Micro packs an entire vision system into an amazingly small package measuring just 30mm x 30mm x 60mm—the size of a remote head camera. Its small size, together with a unique non-linear calibration tool that enables mounting at angles of up to 45-degrees makes In-Sight Micro ideal for mounting in tight spaces on robots and hard-to-reach machinery anywhere on the production line. Smartest…In-Sight Micro includes the proven Cognex vision tool library to handle the broadest range of vision applications for the widest array of industries. And with the new EasyBuilder® configuration software, even the most powerful vision tools are accessible to users with little vision experience. Easiest…No PC required! The...

Read More

High Performance Vision Sensor Inspections

Posted in Cognex, Products

Industrial Sensors: Checker The simple, powerful vision sensors from Cognex. The SensorView™ 2 smart display from Cognex gives production managers the power to create, edit and monitor vision sensor activity without the need for a PC. With integrated part detection, lighting, I/O and job change, Checker 4G is the easy and affordable way to verify the products you manufacture. Four simple steps walk you through setup The image display simplifies setup by enabling you to see what the sensor sees Dynamic help is always available Edits and change values as required. Suports custom logicfrom the display panel. Checker’s unique inspection sensors provide the most reliable way to inspect your part: Brightness sensors look for dark or light areas on the part. Width sensors measure the width of a part, component, or feature. Contrast sensors look for areas on the part that contain both bright and dark areas:...

Read More

Cognex In-Sight 7000

Posted in Cognex, Products, Uncategorized, Video

Cognex Insight 7000 Entry level vision system  straight out of the box—In-Sight 7010 Models: 7010, 7020, 7050, 7200, 7400, 7402, 7230, 7430, 7432, 7210, 7410, 7412 In-Sight 7000 Series Small, tough and very smart The In-Sight® 7000 series of vision systems features powerful vision tools, autofocus, faster image capture, integrated lighting and lens and the capability to power and control a range of external lighting—all in a compact, industrial IP67 package that makes the system ideal for more applications than ever before. Autofocus Users can simply set and save the optimal focus values associated with the inspection of specific parts, making In-Sight 7000 the ideal choice for production situations requiring regular part changes or projects that require the vision system to be placed in hard-to-reach spaces. Integrated Lighting and Lens In-Sight 7000 offers integrated, field-replaceable lighting with five different color options, giving users...

Read More

Cognex Systems

Posted in Cognex

Cognex

Read More

ATEX and IECEx Certified Cameras

Posted in Automotive, Cognex, Featured, Medical, Other, Products

ATEX and IECEx certified camera The VisEx camera solution is the only completely ATEX and IECE certified Enclosure and Camera solution available in the marketplace today.  We have designed and tested the enclosure and camera together so that it meets the standards required for ATEX/IECEx certification. Manufactured in marine grade stainless steel and toughened glass, the VisEx camera housing offers excellent environmental protection with protection to IP66/67 as standard. Visex ATEX and IECEx Certified Camera Enclosure The VisEx camera housing is suitable for housing various POE (Power Over Ethernet) camera and vision systems where operation in a Zone 1 hazardous area is required. Some examples of where these could be (and have been) used: Zone 1 areas vision inspection – large quantities of flammable liquids, gasses, ignitable vapour or mist is expected to be present for long periods of time under...

Read More

Since our foundation in 1967, ABCON has supplied automation controls and sensor technology into most types of manufacturing process and industry sectors. We have always moved with the times, supplying the latest sensing technology as it becomes commercially available. Throughout our history we have continually formed alliances with some of the Worlds leading manufacturers of sensor technology.

vpteam@visionprojects.co.uk

+44 (0)114 244 2424

Application
[dynamictext Application "CF7_get_post_var key='title'"]

Name*

Email*

Telephone Number

Your Message

captcha