Pages Navigation Menu

Ready meal sleeve and best before date verification

Posted in 2D Datamatrix Reading, Diffuse Dome Light, Featured, Food & Beverage, Inspection, Lighting, Object Location, OCR (Optical Character Recognition), Packaging, Part Identification, Presence/Absence, Video

...

Read More

Piston Circlip Inspection

Posted in Automotive, Diffuse Dome Light, Featured, Inspection, Lighting, Object Location, Presence/Absence, Video

...

Read More

CAB and Fuse Box Assembly Check

Posted in Automotive, Colour Inspection, Direct Bright Field Illumination, Featured, Inspection, Object Location, Part Identification, Presence/Absence, Video

...

Read More

Assembly verification

Posted in Automotive, Direct Bright Field Illumination, Featured, Inspection, Lighting, Object Location, Presence/Absence, Video

...

Read More

Bead Tracking

Posted in Automotive, Cognex, Featured, Flaw Detection, Inspection, Object Location, Precision Measurement, Presence/Absence, Robotic Guidance, Video

...

Read More

Spot the Difference

Posted in Automotive, Diffuse Dome Light, Featured, Flaw Detection, Inspection, Lighting, Object Location, Presence/Absence, Video

See if you can spot the differences between these two images (hint … there’s 5), watch the video for the results....

Read More

Barbie Vision

Posted in 3D Inspection, Featured, Flaw Detection, Inspection, Object Location, Other, Precision Measurement, Presence/Absence, Video

Get in touch with us to have a look at your vision application. The Vision Projects...

Read More

Windscreen boss position on glass

Posted in Automotive, Featured, Object Location, Precision Measurement, Robotic Guidance

The Challenge: To ensure the position of a boss on a windscreen is positioned correctly. The system needs to detect the pitch and yaw of the boss which is mounted directly on the windscreen. The boss is the mounting point for the rear view mirror and in car microphone, so its critical that it is positioned correctly.  A tolerance of 0.2mm was needed for its position with an angular tolerance of +/- 2 degrees. Our Solution: The positional data of each boss was relayed to the PLC and screenshot of the results was displayed on the screen next to the production line. The accuracy required was achieved with the machine vision inspection system and it saved a lot of time by eliminating the need for manual / operator inspection. The data obtained from each inspection was also tagged to the job to...

Read More

Hot Cross Bun Inspection

Posted in Colour Inspection, Direct Bright Field Illumination, Featured, Flaw Detection, Food & Beverage, Inspection, Lighting, Object Location, Presence/Absence

The Challenge: Each tray of buns needed to be checked to ensure that the “crosses” were present (and in the right place and the right size) and that the bake was right (by checking the colour of the buns). All the information needed to be displayed to the bakery manager, in his office, and to the operator on the line so they could change the settings on the oven if they we’re not correct. This needed to happen at a rate of  6m/min on 600mm wide conveyor. The Solution: All buns were inspected successfully with a colour machine vision system. The camera were connected directly to the factory network so the images and results could be displayed to the bakery manager, and on a large display right next to the production line. Additionally  all the pass/fail images are stored on the network for production analysis at...

Read More

Insert Detection

Posted in Automotive, Featured, Inspection, Object Location, Part Identification, Presence/Absence, Robotic Guidance

The Challenge: A moulded automotive housing travels down a conveyor at a linear speed of 10m/minute. Brass threaded inserts are pressed into the moulding at eight locations. Sometimes the inserts are incorrectly inserted or occasionally missing all together. The vision system needs to check that all inserts are present and correctly inserted into the part. Our Solution: A self-contained vision system locates the moulded part in 360 degrees of potential rotation on the conveyor. The inserts are then inspected as required. Any inserts/location that fails the inspection is relayed to operator in order for them to perform corrective action. This helped improved the factory automation on site and reduced human operator...

Read More

Label Position Inspection

Posted in 1D Barcode Reading, Inspection, Object Location, Uncategorized

...

Read More

Moulding and Printing Confirmation

Posted in Featured, Flaw Detection, Inspection, Object Location, Other, Precision Measurement, Presence/Absence

...

Read More

Needle Inspection

Posted in Back Lighting, Featured, Flaw Detection, Inspection, Medical, Object Location, Precision Measurement, Presence/Absence

The Challenge: To check that each needle is present in each off the plastic applicators, that they have been inserted correctly and not broken. Needed to be 21 CFR Part 11 compliant system. Our Solution: A turnkey vision inspection solution to check every applicator. The vision tools checked the presence, size, and position of every needle. The cameras are integrated to machine, PLCs and screens for the operator to help...

Read More

Plaster Inspection

Posted in Back Lighting, Featured, Flaw Detection, Inspection, Medical, Object Location, Presence/Absence

The Challenge Plasters are produced at a rate of 35 per minute. Defects that may happen during manufacture include a missing gauze, a misshaped gauze, an incorrectly positioned gauze, sometimes two or more gauzes may be present in one plaster. The machine vision system needs to detect all of these defects and trigger a reject station on the line to remove the defective product. The Solution Using a high resolution camera system we managed to detect all of the defects. The results are displayed on a screen situated right next to the production line (with the pass/fail images saved in a folder on a network for later analysis / traceability purposes). Any defective parts were removed from the line at a reject station that is triggered by the camera....

Read More

Sandwich Assembly Inspection

Posted in Colour Inspection, Featured, Food & Beverage, Inspection, Object Location, Presence/Absence, Uncategorized

Read More

Sports Drink Cap Check

Posted in Featured, Flaw Detection, Food & Beverage, Inspection, Object Location, Other, Presence/Absence

The Challenge: The machine vision system needs to check that all of the sports bottle caps have been assembled correctly, at a rate of 100 bottles per minute. Defects can include misformed, misaligned or missing caps, and kinks. The solution also needs to cater for multiple variants and needs to be able to suitable for a food grade (wash-down) environment. Our Solution: A turnkey, IP65 machine vision solution was installed to check every bottle ‘on the fly’, at a rates of up to 120 bottles per minute. The vision system checked for cap presence, position, and shape. The system was also integrated to a PLC which operates a reject mechanism, thus providing containment of defective products. Images of any defects are stored on a server with a date and time stamp, they are also displayed to the operator to help...

Read More

Spray Bottle Cap Inspection

Posted in Back Lighting, Featured, Flaw Detection, Inspection, Object Location, Other, Presence/Absence

The Challenge: The bottles are being produced at a rate of  60  per minute and travel at 100mm/second. Each bottle needs to be checked to ensure that the applicator has been attached correctly, that the lever is in the right position, and that it is not damaged in any way. Our Solution: The turnkey solution managed to check for the presence of the applicator using a contrast tool, a measurement tool ensured that the position of the lever was correct, and a mixture of various other tools ensured that there were no defects. If a defective bottle was detected, the camera triggered a reject station in order to remove it from the production...

Read More

Robot Vision Inspection On A Panel

Posted in Automotive, Featured, Flaw Detection, Inspection, Object Location, Presence/Absence, Robotic Guidance, Video

...

Read More

Braille Printing Plates

Posted in Dark Field Illumination, Featured, Inspection, Object Location, OCR (Optical Character Recognition), Other

The Challenge: To be able to detect and identify the braille characters marked on the surface of a metal plate. Our Solution: The braille alphabet was pre-programmed into the database for reference once the characters were identified with the machine vision system and lighting solution. Using a Dark Field Lighting Technique we were able to identify the braille characters on the surface of the product. The light does not fall directly onto the objective and the majority of the region of interest is dark, while the affected areas on the surface, the braille characters, appear bright. Once the impressions were identified and segmented, they were then referenced to the database and the string of characters were identified. Find out more about the European Braille Packaging Font Standards, and download font sets at...

Read More

ECU Assembly Inspection

Posted in Colour Inspection, Diffuse Dome Light, Featured, Flaw Detection, Inspection, Lighting, Object Location, Other, Presence/Absence

The Challenge: To ensure that certain components have been correctly assembled on the PCB. Our Solution: A high resolution colour camera and white LED dome light was used to acquire an image of each PCB. Major components, such as electrolytic capacitors, chokes and the semiconductor chips are checked for presence and orientation (capacitors).  Incorrectly assembled PCBs are rejected and the machine operator...

Read More

Since our foundation in 1967, ABCON has supplied automation controls and sensor technology into most types of manufacturing process and industry sectors. We have always moved with the times, supplying the latest sensing technology as it becomes commercially available. Throughout our history we have continually formed alliances with some of the Worlds leading manufacturers of sensor technology.

vpteam@visionprojects.co.uk

+44 (0)114 244 2424

Application
[dynamictext Application "CF7_get_post_var key='title'"]

Name*

Email*

Telephone Number

Your Message

captcha