Pages Navigation Menu

Trim Material and Colour Inspection

Trim Material and Colour Inspection

Trim Material and Colour Inspection

The Challenge:

The machine vision system needs to be able to identify which trim material has been assembled and what its colour is, with over 20 variants to the texture and shade, this needs to be extremely accurate. This needs to happen on the fly while the job is moving on a conveyor at a rate of 5m/min. The system needs to be able to connect to the network and recognise which job is being broadcast so it can ensure the configuration is correct for each instance.

Our Solution:

A high resolution colour vision camera was installed which detects the the trim colour, and material as it moves down the conveyor. The detected trims are compared against the expected configuration and incorrectly assembled trims are highlighted on the operator interface screen. The defective job can then be removed from the line, re-worked and re-checked by the vision system.

Trim Material and Colour Inspection

Since our foundation in 1967, ABCON has supplied automation controls and sensor technology into most types of manufacturing process and industry sectors. We have always moved with the times, supplying the latest sensing technology as it becomes commercially available. Throughout our history we have continually formed alliances with some of the Worlds leading manufacturers of sensor technology.

vpteam@visionprojects.co.uk

+44 (0)114 244 2424

Application
[dynamictext Application "CF7_get_post_var key='title'"]

Name*

Email*

Telephone Number

Your Message

captcha